Drive Pinion Height - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › Drive Pinion Height - Nissan 180SX S13 Workshop Manual
Drive Pinion Height
ADJUSTMENT
To avoid confusion while calculating bearing shims, it is abso- lutely necessary to stay with the metric system. If you measure anything in inches, the results must be converted to the metric system.
Drive Pinion Height
First prepare Tools for pinion height adjustment. Dummy Shaft (KV38103910) Height Gauge (KV38100120) Stopper (KV38100140) Feeler Gauge ~®@80> To simplify the job, make a chart, like the one below, to organize your calculations.
SPD233
| LETTERS | HUNDREDTHS OF A MILLIMETER | |
|---|---|---|
| H: | LETTERS Head number | A MILLIMETER |
| N: | Measureing clearance |
3. Write the following numbers down the chart. H: Head number
Head number (H) = -_ §pD5a2
4. Set Tool (Dummy shaft) as shown below and tighten drive pinion nut carefully to corret preload of 1.0 to 1.3 N-m (10 to 13 kg-cm, 8.7 to 11.3 in-Ib}. Tool Tool: Dummy shaft (KV38103910)
SPD922
PD-17
Parts & tools for this job For Nissan 180SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 180SX
As an Amazon Associate we earn from qualifying purchases.