DOOR CONTROL - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › DOOR CONTROL - Nissan 200SX S12 Workshop Manual
DOOR CONTROL
DOOR CONTROL
Control Cable and Rod Adjustment
DEFROSTER DOOR CONTROL ROD
Be sure to expand control cable clip with both ‘* bands and then remove control cable from Move side fink in direction of arrow.
1. cable ctip. link while pushing de-
2. Connect rod to side Be sure to compress cable clip with both hands © froster door lever in direction of arrow. and then remove it from control base housing. against the bottom of Be sure to butt clip © control base housing.
nivaoas
AIR CONTROL CABLE
When adjusting ventilator door rod, defroster © * Clamp the cable white pushing cable outer case door rod, disconnect air control cable from and side link in direction of arrow. side link first, and then adjust door rod and door cable, Reconnect air control cable and re- adjust it.
VENTILATOR DOOR CONTROL ROD
Move side link in direction of arrow. 1, 2, With upper and lower ventilator door levers held in the direction of the arrow, connect rods @ and @ to their corresponding ventilator door levers in that order. oor lever (upper) PARE
— Door rod B ~ Beer rod {I>
Parts & tools for this job For Nissan 200SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.