REMOVE CLAP ASSEMBLY PIVOT PIN. - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REMOVE CLAP ASSEMBLY PIVOT PIN. - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev No. 1 Bow - Nissan 240SX 1991-1992 Workshop ManualNext › No. 1 Bow: NO. 1 BOW (cont'd) - Nissan 240SX 1991-1992 Workshop Manual
No. 1 BowREMOVE CLAP ASSEMBLY PIVOT PIN. - Nissan 240SX 1991-1992 Workshop Manual
REMOVE CLAP ASSEMBLY PIVOT PIN.
NO. 1 BOW 14-8 NO. 1 BOW (cont'd)
REMOVE CLAP ASSEMBLY PIVOT PIN.
2.
REMOVE CLAMP ASSEMBLY SPRING.
3.
REMOVE CLAMP HANDLE ASSEMBLY SCREW AND
4. WASHER.
REMOVE CLAMP ASSEMBLY FROM NO. 1 BOW
5.
ASSEMBLE
INSTALL CLAMP ASSEMBLY TO NO. 1 BOW.
1.
Position clamp assembly into No. 1 bow.
(a)
Apply Loctite (P/N 271 or equivalent) to clamp handle s
(b) crew threads and install washer and screw. Torque: 17 Nm (13 ft. Ib.)
‹ Prev No. 1 Bow - Nissan 240SX 1991-1992 Workshop ManualNext › No. 1 Bow: NO. 1 BOW (cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.