Plymouth Workshop Manuals
PB 150 V8-318 5.2L VIN T 2-BBL (1983)
Brakes and Traction Control > Drum Brake System > Brake Shoe > Component Information > Service and Repair > Brake Shoe Removal and Installation > Page 2595
Fig 1 Eleven Inch Brake Assembly
10. Using Tool C-3785, or equivalent, install spring over anchor. (Be sure cable guide remains flat against shoe web and that secondary spring
11. Using pliers, squeeze ends of spring loops (around anchor) until parallel.
12. Install adjusting star wheel assembly between primary and secondary shoes, with star wheel next to secondary shoe.
The left star wheel adjusting stud end is stamped "L" (indicating its position on the vehicle) and the star wheel is cadmium plated.
The right star wheel is black and the adjusting stud end is stamped "R".
|[PREV PAGE] [NEXT PAGE]|