Prowler V6-3.5L VIN G (1999)
damage the center cap.
2. Remove the center cap from the wheel. Center cap is removed by inserting a trim stick into the notch on the center cap and prying it off the wheel.
3. Remove wheel and tire.
4. Remove the nut and bolt mounting the shock absorber clevis to the mounting bracket/isolator on the 1ower control arm.
5. Remove the bolt and nut attaching the shock absorber to the frame bracket.
6. Remove the shock absorber/coil spring assembly from the vehicle.
CAUTION: When the shock absorbers are installed on this vehicle, the vehicle must be at curb height before either shock absorber mounting bolt is
tightened and torqued to specifications. This is required to maintain the vehicles correct curb height.
