911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Loosening oil filter
Information
Never use a sharp object to remove or fit the O-ring on the oil filter cover.
Do not scratch the sealing surface of the oil-filter housing.
2. Lever off the O-ring on the filter housing using a small plastic spatula, for example.
O-ring for oil filter housing
3. Change the oil filter element. To do this, pull the oil filter element out and replace the filter element and the two O-rings.
Component overview of oil filter
1 - Oil filter cover
2 - O-ring on oil filter cover, 71.5 x 3.5
3 - Small O-ring, 10 x 2
4 - Oil filter element
5 - Oil-filter console
4. Remove the remaining quantity of oil from the oil-filter housing by suction.