Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-778017.png)
Residual pressure retaining valve
7. Fit bellows at the top.
8. Fit spring-strut mount using socket wrench insert 3353 and arm bracket P9630.
Removing/fitting spring-strut mount
9. Fit mounting saddle -Screws A- and align it so that the upper arm of the bearing -B- points to the residual pressure retaining valve.
Fitting mounting saddle
10. Align the air spring again so that the residual pressure retaining valve is located exactly at the axis of symmetry -Arrow- of the air-spring strut.
