Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)20 · Automatic gearbox
20 · Transmission

Automatic gearbox (Selector cable): Adjustments

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Adjustments › Selector cable
Automatic gearboxSelector cable

SELECTOR CABLE

Service repair no - 44.30.04

Adjust

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Move gear selector lever to position ’P’.
Selector cable – Move gear selector lever to position ’P’.
  1. Loosen nut securing selector cable rod to selector lever.
  2. Push selector lever fully forwards.
  3. Ensure the park mechanism is engaged by trying to rotate both front wheels.
  4. Tighten nut securing selector cable rod to selector lever to 7 Nm.
  5. Remove stand(s) and lower vehicle.
  6. Check that vehicle will only start in position ’P’ and ’N’.
  7. Check that forward drive is achieved in position ’D’ and ’L’, and reverse drive in position ’R’.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.