02 · General

Brakes

General dataBrakes · page 1 of 2

BRAKES

Type Front	Power - assisted self - adjusting ventilated disc
Type Rear	Power - assisted self - adjusting solid disc
Pad and Lining Surface Area:
Front A/T	58.0 cm² x 2
Front M/T	49.4 cm² x 2
Rear	29.7 cm² x 2
Parking Brake Type	Mechanical actuating, two rear wheel brakes
Parking brake lever	To be locked when pulled 7 – 11 notches with 200 N force applied
Brake pedal height (with floor mat removed):
M/T	190 mm minimum
A/T	195 mm minimum
Brake Pedal Free play	1 – 5 mm
Master cylinder Piston – to – pushrod clearance	0 – 0.04 mm
Front Disc thickness:
New	23.0 mm
Service Limit	21.0 mm
Rear Disc thickness:
New	10.0 mm
Service Limit	8.0 mm
Disc runout	0.10 mm max
Disc parallelism	0.015 mm
Front Pad thickness – M/T:
New	12.5 mm
Service Limit	1.6 mm
Front Pad thickness – A/T:
New	11.0 mm
Service Limit	1.6 mm
Rear Pad thickness:
New	9.0 mm
Service Limit	1.6 mm
Anti - lock braking system:
Up to VIN 144844	ABS 2
From VIN 144845	ABS BY4

Compressor Type/Make	Swash - plate type/NIPPONDENSO
Compressor Clutch Type:	Dry, single plate, V ribbed belt drive
Condenser Type	Corrugated fin type
Evaporator Type	Corrugated fin type
Blower Type	Sirocco fan, 5 speed
Refrigerant Type	R134a
Quantity	750 + 0 – 50 g
Lubricant capacity:
Condenser	10 – 20 ml
Evaporator	20 – 30 ml
Line or hose	10 ml
Receiver	10 ml
Compressor	160 + 15 – 0 ml
Compressor Stator coil resistance	3.4 – 3.8 Ohms at 20°C
Compressor Pulley – to – pressure plate clearance	0.35 – 0.65 mm
Compressor belt tension:
Used belt	10.0 – 12.0 mm Deflection with 100 N (10 kg) between pulleys
New belt	4.5 – 7.0 mm Deflection with 100 N (10 kg) between pulleys

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.