LW2 V6-3.0L VIN R (2000)
4. Install ignition switch bezel.
5. Install steering wheel.
6. Connect horn/cruise connector.
7. Install driver inflator module.
8. Enable SIR system. Refer to: Air Bag(s) Arming and Disarming.
Steering Wheel
TOOLS REQUIRED
-
J 1859-A Steering Wheel Puller Bridge
-
J-42578 Steering Wheel Puller Legs
REMOVAL
1. Disable the SIR System. (Refer to: Air Bag(s) Arming and Disarming procedures.)
2. Remove driver inflator module.
3. Disconnect cruise control (if equipped) switch connectors and disconnect harness from steering wheel.
4. Remove steering wheel attachment nut and discard.