seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ATF: replace > < ATF level: check
ATF: filling
ATF: filling
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Oil tester w/auto -VAS 6262-
  W00-10191
t  Filler adapter -VAS 6262/2-
  W00-10419
–  With the engine “running”, screw on the filler adapter -VAS 6262/2- and tighten by hand.
–  Add 1 litre of ATF.
–  Remove the oil tester w/auto -VAS 6262- at the fast connection and check:
whether ATF is coming out through the hole of the adapter:
it is not necessary to add ATF.
–  Allow ATF to come out until it is dripping.
–  Tighten the sealing screw with a new seal, to a torque of 15 Nm. This concludes the ATF test.
If no ATF is dripping:
–  add another litre
  WARNING
The operation of the gearbox will be affected whether there is insufficient or excessive ATF. But if the level is down by as much as 2 litres, the gearbox should be more thoroughly examined. There is probably a leak of “some significance”.
  N37-10321

ATF: replace > < ATF level: check