seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Automatic gearbox, gears, control > < Topping up the ATF

Leon Mk1

Changing the ATF
Changing the ATF
   
–  Switch off the engine.
  N34-10476
–  Remove the sealing plug for ATF level test located in the oil sump -arrow-.
  N37-0189
–  Unscrew ATF inspection plug -A-.
–  Always replace seals -B-.
–  Unscrew the overflow tube -C-.
–  Draining the ATF
–  Screw in the overflow tube -C-.
  N38-10003
–  Adapter for oil filling -VAS 6262/2- screwed in hand tight.
–  Shake the oil bottles before opening.
–  Before screwing the adapter for oil filling -VAS 6262 A- onto the oil bottle, observe the notes of the filling tube → Anchor.
–  Add 3 litres of ATF → Electronic spare parts catalogue through the filler hose.
  N37-10321
–  Reinsert the bolt -A- for the ATF level verification with a new join ring -B- hand tight.
–  Start the engine and select all the gear lever positions one after another for approximately 10 seconds each.
–  Then check the level of ATF and top up → Chapter
  N38-10003

Automatic gearbox, gears, control > < Topping up the ATF