Leon Mk1
Removing and installing differential |
Special tools and workshop equipment required |
t | Drift -VW 195- |
t | Drift -VW 460/2- |
t | Oil seal extractor lever -VW 681- |
t | Multi-purpose tool -VW 771- |
t | Torque wrench -V.A.G 1331- |
The drive shaft does not need to be removed for removing and installing the differential. |
1 - | Nut, 25 Nm |
q | Qty. 2. |
2 - | Bolt, 25 Nm |
3 - | Torque converter housing |
q | Is allocated to gearbox housing according to engine version. |
q | Replacement parts are allocated according to gearbox code letters → Electronic parts catalogue “ETKA”. |
4 - | Sleeve |
q | To centralise the gearbox and torque converter housing. |
5 - | Gearbox housing |
q | Before assembling gearbox and converter housing, apply -AMV 188 200- to sealing surfaces. |
6 - | Breather pipe |
q | Removing with pliers. |
q | Driving onto stop with drift -VW 460/2-. |
7 - | Breather cap |
8 - | Flange shaft |
q | Removing with -VW 771-. |
q | Driving in with plastic hammer. |
9 - | Circlip |
q | Always renewing. |
q | Removing and installing → Fig.. |
10 - | Flange shaft oil seal |
q | Before installing, half-fill space between sealing lips with sealing grease -G 052 128 A1-. |
q | Can be renewed with gearbox installed → Chapter. |
q | Removing with -VW 681-. |
q | Driving in → Fig.. |
11 - | Differential |
q | Dismantling and assembling → Chapter. |
12 - | Bolt, 20 Nm |
q | Checking gear oil with gearbox installed → Chapter. |
|
|