seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing differential > < Renewing seal for right flange shaft

Leon Mk1

Thickness of shim „S3“: determine
Thickness of shim „S3“: determine
t  The allowance „r“ in relation to the master gauge „Ro“ is measured for the final drive sets supplied as replacement parts and marked on the outer circumference of the crown wheel.
t  Subtract value „e“ if measurement is obtained on red scale.
t  Add value „e“ if measurement is obtained on black scale.
Formula:
„S3“ = „S3*“ + „r“ + „e“ („e“ on black scale)
„S3“ = „S3*“ + „r“ – „e“ („e“ on red scale)
   
Example: 
 Inserted shim „S3*“0.58 mm
+Allowance „r“0.29 mm
-Determined value „e“ (in red scale)0.17 mm
=Thickness of shim „S3“0.70 mm

–  Determine shim(s) according to table. Part numbers → Spare parts catalogue.
Available shims for „S3“
   
Shim thickness (mm) → Remark
0,530,851,17
0,570,891,21
0,610,931,25
0,650,971,29
0,691,011,33
0,731,051,37
0,771,091,41
0,811,13 

1)  The exact shim thickness required can be obtained by using the shim tolerance variations. Install two shims if necessary.
   

Removing and installing differential > < Renewing seal for right flange shaft