seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Mechatronic unit for the semi-automatic gearbox J743 : removing > < Safety information for the mechatronic unit for dual clutch gearboxJ743
Mechatronic unit for the semi-automatic gearboxJ743: Overview
Mechatronic unit for the semi-automatic gearbox -J743-: Overview
→ Chapter „Safety information for the mechatronic unit for dual clutch gearbox -J743-“
→ Chapter „Mechatronic unit for the semi-automatic gearbox - J743 -: removing“
→ Chapter „Moving mechatronic unit for dual clutch gearbox - J743 - into removal position by hand“
→ Chapter „Installing mechatronic unit for dual clutch gearbox - J743 -“
→ Chapter „View of the selector forks of the gearbox with mechatronic unit removed“
   
1 - Bolt.
q   10 Nm
q   M8x35
q   Always replace.
  Note
First observe the information on removal.
2 - Bolt.
q   10 Nm
q   M8x90
q   Always replace.
3 - mechatronic system for automatic DSG gearbox -J743-
  Note
t  A »new« mechatronic unit is correctly filled with oil.
t  Do not drain oil. A »removed« mechatronic unit is sent back with its oil in.

   
–  Remove the cover of the ventilation and fit a suitable cover so that it is sealed oil tight.
When working on the mechatronic, the purging must be handles with care.
–  When fitting the mechatronic, the cap must be removed from the ventilation and a suitable cover must be fitted.
  N34-11381

Mechatronic unit for the semi-automatic gearbox J743 : removing > < Safety information for the mechatronic unit for dual clutch gearboxJ743