| Checking function of ignition key removal lock |
| –
| Turn the ignition key slightly clockwise to the „ignition on“ position. |
| –
| Press and hold brake pedal. |
| l
| Switching from position „P“ of the selector lever must be possible with pressed interlock button on the selector lever without tick. |
| l
| It should not be possible to remove the ignition key when the selector lever is in any position other than „P“. |
| –
| Shift selector lever to position „P“. |
| –
| Remove the ignition key. |
| l
| It should only be possible to remove ignition key in selector lever position „P“. |
| l
| The selector lever cannot be moved from „P“ when the interlock button and the brake pedal is depressed. |
| If the ignition key removal lock does not function as described: |
| t
| Selector lever cable, vehicles up to 02.2009: check and adjust → Anchor. |
| t
| Carry out a vehicle check using the function „Guided fault finding“ of the diagnosis centre -VAS 505X-. |
|
|
|
