seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Selector mechanism from 03.2009 onwards > < Basic settings

Leon Mk1

Renewing gear oil
Renewing gear oil
Code, engine allocation → Chapter.
Capacity, → Chapter
The gearbox is filled for life. Therefore, there is no need to check the oil level of this gearbox.
This explains why there is no oil level check.
If the gearbox has started leaking, check where the oil is coming from.
   
–  Then allow all the remainder of the oil to run out and dispose of it properly.
–  The leak must be repaired first.
–  Then install the drain plug again.
  N34-11371
The new oil is poured in through the breather hole.
If the gearbox has been installed, the air filter and/or battery must be removed in order to fill it with oil, depending on the model and engine size.
Removing and installing air filter housing → Rep. gr.24.
–  Remove battery and -battery tray- → Rep. gr.27.
  N34-11773
–  Pull cap off breather hole.
  N34-11771
–  Fit oil filling adapter -VAS 6262 A- with adapter -VAS 6262/4- on breather hole.
  Note
Shake oil bottles before filling.
  N34-11772
–  Screw adapter -VAS 6262/6- onto bottle and twist onto oil filling adapter -VAS 6262 A-.
–  Fill 1.7 litres of oil.
Do not fill any more or any less oil. Malfunctions would result!
After filling, remove oil filling adapter -VAS 6262 A-. Clean area around breather hole with a cloth and fit the breather cap.
  N34-11770

Selector mechanism from 03.2009 onwards > < Basic settings