| Cleaning norms when working in the gearbox |
| t
| Thoroughly clean unions and adjacent areas before removing. |
| t
| When cleaning, do not use cloths with fibres. |
| t
| Seal off open lines and connections with clean plugs or sealing caps immediately. |
| t
| Place removed parts on a clean surface and cover. Use foil or paper. Use only lint-free cloths. |
| t
| If repairs cannot be carried out immediately, carefully cover or seal open components. |
| t
| Only fit clean parts: only remove replacement parts from packaging immediately prior to installation. |
|
|
|
