seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Transporting and securing gearbox to assembly stand > < Gearbox support: dismounting and assembly

Leon Mk1

Pendulum support: dismounting and assembly
Pendulum support: dismounting and assembly
Removal:
–  Raise the vehicle.
   
–  Remove the central soundproofing, bolts -1 ... 3-.
  A10-1565
–  Extract bolts -1... 3- and remove the pendulum support.
Installation
Installation is carried out in the reverse order. When installing, note the following:
Fit the pendulum arm support .
–  Fit the pendulum support first to the gearbox and then to the assembly mounting bridge.
  A10-1578
–  Renew bolts
  N34-1826
Component Nm
Pendulum support tosubframe -A-
Replace bolts		100 + 90° (1/4 turn)
 gearbox arrows -B- and -C-
Replace bolts		40 + 90° (1/4 turn)

   

Transporting and securing gearbox to assembly stand > < Gearbox support: dismounting and assembly