seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Reverse gear brake: Removing and fitting > < ATF pump: checking

Leon Mk1

Piston for 2ª and 4ª gear brake: Removing and fitting
Piston for 2ª and 4ª gear brake: Removing and fitting
Removing and fitting the securing ring
   
–  Fit a 300 mm clamp -A- as in the illustration.
–  Press the cover with the screw of the clamp -A-.
–  Remove the safety ring -B- by levering with a screwdriver.
Position brake strap -B2-
  E38-0015
–  After dismantling, secure the brake strap, e.g. with a wire stirrup -A- so it cannot open.
  N38-0109

Reverse gear brake: Removing and fitting > < ATF pump: checking