Leon Mk1
ATF pump: general fitting diagram |
1 - | Segment ring |
q | Checking the correct adjustment |
q | Do not overstretch |
2 - | Bolt |
q | 10 Nm |
3 - | Guide wheel support |
4 - | Outer pinion |
q | Check for wear → Anchor and → Anchor |
5 - | Inner pinion |
q | Check for wear → Anchor and → Anchor |
6 - | ATF pump housing |
7 - | O-ring |
q | Always replace |
8 - | Torque converter seal |
q | Removing and fitting |