Leon Mk1
| Partition top and bottom, commercial vehicles: assembly overview Assembly overview |
| 1 - | Partition, bottom |
| q | removing and fitting → Chapter |
| 2 - | Bracket (bottom) |
| q | 2 units |
| 3 - | Securing nut |
| q | 4 units |
| 4 - | Bolts |
| q | 4 units |
| q | Tightening torque: 8 Nm |
| q | For fixing the partition at the top and bottom, and the reinforcement flange |
| 5 - | Partition, top |
| q | removing and fitting → Chapter |
| 6 - | Bracket (top) |
| q | 2 units |
| 7 - | Reinforcement flange |
| 8 - | Bolt. |
| q | 2 units |
| q | For fixing the partition at the top on the upper bracket |
| 9 - | Nut |
| q | 2 units |
| q | For fixing the partition at the top on the upper bracket |
| 10 - | Bolt. |
| q | 4 units |
| q | Tightening torque: 8 Nm |
| q | For fixing the upper bracket to the bodywork |
| 11 - | Securing nut |
| q | 4 units |
| 12 - | Securing nut |
| q | 2 units |
| 13 - | Bolts |
| q | 4 units |
| q | Tightening torque: 8 Nm |
| q | For fixing the partition at the bottom on the bottom bracket |
| 14 - | Fixing screws of the bottom bracket |
| q | 2 units |
| q | Tightening torque: 8 Nm |
| 15 - | Plate |
