seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Instrument panel diffusers and air conduits > < Components of the manual air conditioning (Climatic)

Leon Mk1

Removing and installing temperature flap actuator
Removing and installing temperature flap actuator
Removal:
–  Remove dash panel → General body repairs, interior; Rep. gr.70.
–  Remove central pipe of dash panel → General body repairs, interior; Rep. gr.70.
   
–  Remove flexible shaft -2- from actuator -1-.
–  Unscrew bolt -3- (1.5 Nm).
–  Swivel actuator -1- in direction of arrow -A- and remove it from mountings -4-.
  N87-10908
Installation
  Note
t  Before installing, check that position of worm drive -1- and cam segment -2- align.
t  The raised winding (dark hatched area) -arrow A- must engage in deeper gaps between teeth -arrows B-.
  N87-10909
–  Fit actuator -1- into mountings -5-.
–  Hook cam segment -4- into mounting -arrow A- of temperature flap -3-.
t  Check function of actuator.
  Note
It must be possible to move the temperature flap to its end positions easily and smoothly.
Adjustment of temperature flap not OK:
–  Remove actuator and repeat installation, as described.
Adjustment of temperature flap OK:
–  Perform remaining installation in reverse order of removal.
  N87-10910

Instrument panel diffusers and air conduits > < Components of the manual air conditioning (Climatic)