seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Safety instructions > < Heater and air conditioning unit, front

Leon Mk1

Removal
Removal
–  Remove glove box and centre console. → General body repairs, interior; Rep. Gr.68
   
–  Remove support -A- for dash panel cross member (on passenger's side at transmission tunnel). → General body repairs, interior; Rep. Gr.68
  A87-0433
–  Remove bolts -A- and -B- between support -C- and air conditioner unit.
–  Remove support -C- for dash panel cross member (on driver's side at transmission tunnel). → General body repairs, interior; Rep. Gr.68
–  Remove the two intermediate pieces to rear footwell vent air duct.
–  Mark both connectors -A- and -B- to the sensors Air temperature sender, left foot well zone vent -G261- and Air temperature sender, right foot well zone vent -G262-(risk of swapping them).
  A87-0454
–  Unplug connectors -A- and -B- from footwell air temperature senders.
–  Remove the bolts -C-.
–  If applicable, detach wiring harness from footwell vent -D-.
–  Pull footwell vent slightly to rear and remove it in direction of passenger's footwell.
  A87-0434

Safety instructions > < Heater and air conditioning unit, front