Servicing clutch control

• Brake fluid reservoir
• Mounting bracket
• Clutch pedal
• Retainer
• ◆ Replace only with master cylinder removed
• ◆ Removing =>Fig.1
• ◆ Pressing on =>Fig.2
• Master cylinder rod
• Bolt, 20 Nm

• Master cylinder
• ◆ Removing and installing
  
• Clip
• ◆ To secure the pipe
• Seal
• ◆ Always renew
• Seal
• ◆ Insert with brake fluid
• Supply hose
• Pipe/hose assembly

• Bracket
• ◆ Secured to ABS bracket
• Bolt, 25 Nm
• Bracket
• ◆ Secured to gearbox
• ◆ For pipework and selector cable
• Hexagon nut, 20 Nm
• Bolt, 20 Nm
• Clip
• ◆ To secure the pipe
• Sealing boot
• Gearbox
• Input shaft oil seal
• ◆ Removing => Fig.3
• ◆ Installing => Fig. 4

• Seal
• ◆ Always renew
• Slave cylinder with release bearing
• ◆ Remove before removing gearbox
• ◆ Insert with AMV 188 200 03
• Collared bolt, 11 Nm
• Bellows
• Bleed valve
• ◆ Bleeding clutch system
  => Page 30-21
• Dust cap
• Pipe union nut, 20 Nm
• Pipe

→ Fig.1    Lever retainer -A- off in direction of arrow

→ Fig.2    Press mounting -A- on master cylinder operating rod

→ Fig.3    Lever out seal

→ Fig.4    Press seal in carefully onto stop