| –
| Match the mark (arrow -A-) of the interior oil pump rotor with the assembly position mark -B- on the oil pump housing cover. |
| –
| Apply a thin layer of lubricant to the oil pump seal lip. |
| –
| Place hose -T20081/2- over the oil pump seal and carefully guide the pump over the crankshaft drive cams. |
| –
| In the case of interior rotors, align it, lightly withdrawing it from the crankshaft drive cam. |
| –
| Next, carefully fit the oil pump over the guide bolts. |
| –
| Install the oil pump → Item. |
| –
| Remove the hose -T20081/2-. |
| –
| Install the suction pipe → Item. |
| –
| Install the vane pump-compressor-alternator support, remembering the tightening order → Item. |
| –
| Install the toothed belt pinion and the tensioning roller. Toothed belt, install, tighten → Chapter, Toothed belt: remove and install, tighten. |
|
|
|
