seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft dimensions > < Crankshaft oil seal - pulley side -: renew|Remove

Leon Mk1

Assembly
Assembly
–  Apply thin layer of lubricant to the oil seal lip.
–  Place oil seal on guide hose -T20081/2- and place unit over the crankshaft journal.
   
–  Use tappet -T20081/1- and press the guide hose-oil seal unit until the oil seal. To do so, use the old vibration dampener securing bolt.
–  Remove the guide hose -T20081/2-.
–  Install the crankshaft pinion and immobilise it with countersupport -T20028-.
–  Toothed belt assembly and adjustment of distribution timing → Chapter.
  E13-0014

Crankshaft dimensions > < Crankshaft oil seal - pulley side -: renew|Remove