SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4-cyl. injection engine (1.6 l engine) | Enginecrankshaft group, pistons | Engine block, crankshaft and engine flywheel: disassembly and assembly | Crankshaft oil seal - pulley side -: renew

Remove

–	First remove toothed belt → Chapter.

–	Remove the pinion of the toothed belt from crankshaft, immobilising the pinion with countersupport -T20018-.

–	Apply lubricant to the threaded head of extractor -T20031-, apply and firmly press, screw it into the oil seal as far as possible.

–	Turn the bolt against the crankshaft until the oil seal is removed.

SEAT Workshop Service and Repair Manuals