seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Position of the piston in TDC: verification > < Piston and conrod: Assembly overview

Leon Mk1

Separate new conrod
Separate new conrod
–  Mark the conrods' correspondence to the cylinder → Item
   
–  Clamp the conrod, as shown in the figure, in a bench vice with aluminium soft jaws.
  Note
t  Secure the conrod slowly so that it does not break.
t  Clamp the conrod underneath the marked line.
–  Unscrew 5 turns the two shock absorber bolts -arrows-.
  N13-10285
–  Using a plastic hammer, bang gently on the conrod bearing cap -Arrow-, until it becomes loose.
  N13-10286

Position of the piston in TDC: verification > < Piston and conrod: Assembly overview