Leon Mk1
Cooling system components, bodywork side |
1 - | Radiator |
q | Remove and install → Chapter |
q | After replacing, change all the coolant |
2 - | Upper coolant hose |
q | Coolant hose connection diagram → Chapter |
3 - | Radiator fan |
4 - | Additional fan |
q | On vehicles with optional equipment |
5 - | Air duct |
6 - | 10 Nm |
7 - | Support |
q | To fan connector |
8 - | Connector |
9 - | Expansion tank |
10 - | Plug |
q | Measure with gauge -V.A.G 1274- or -SAT 1274- and adaptor -V.A.G 1274/4- |
q | Test pressure 1.4…1.6 bar |
11 - | Cover |
12 - | From the coolant thermostat housing |
q | → Item |
q | Coolant hose connection diagram → Chapter |
13 - | To the coolant thermostat housing |
q | → Item |
q | Coolant hose connection diagram → Chapter |
14 - | Lower coolant hose |
q | Coolant hose connection diagram → Chapter |
15 - | 15 Nm |
16 - | Heat switch -F18-, 35 Nm |
q | To electric fan |
q | Switching temperatures 1.st speed on: 92…97°C off: 84…91°C 2.nd speed on: 98…105°C off: 91…98°C |
17 - | Support |
q | To radiator |
q | Check the installation position |
q | Note that there are different versions |