| For work on the fuel supply/injection system, carefully follow the “5 rules” of cleaning: |
| t
| Thoroughly clean the connections and their surrounding areas before releasing them. |
| t
| Deposit the parts removed over a clean surface and cover them. Do not use cloths that shed fibres! |
| t
| If the repair work is not carried out immediately, the open components should be covered or carefully stored. |
| t
| Only install clean components: Remove the new parts from their wrapping right before carrying out assembly. Do not install components that have been stored without wrapping (e.g. in the toolbox, etc.). |
| t
| As the system is open: Avoid the use of compressed air when possible. Do not move the vehicle if possible. |
|
|
|
