| The installation is done in the reverse order, taking into account the following: |
| t
| Fit the breather and fuel hoses without bends. |
| t
| Secure the fuel hoses with strip clamps. |
| t
| Check that the fuel hoses are firmly seated. |
| t
| Do not swap the supply and return hoses (return hose, blue or blue mark; supply line, black). |
Note! | Once the fuel tank is installed, check that the supply, return and breather hoses are still attached to the tank. |
| –
| Carry out test drive and read fault memories of all control units again. |
|
|
|
