SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Crankshaft sealing flange, on the flywheel side: replacement (vehicles with manual gearbox) >
< Drive plate: Removing and installing
Leon Mk1
Power unit
4 Cylinder (1.4 l., 4 valve) injection engine
Enginecrankshaft group, pistons
Cylinder block, sealing flange and engine flywheel: removing and installing
Distinctive characteristics of the sealing flanges and the installation equipment T10017 y T10134
Distinctive characteristics of the sealing flanges and the installation equipmentT10017 y T10134
Distinctive characteristics of the sealing flanges and the installation equipment -T10017- y -T10134-
Note
t
Note that different types of sealing flange are used
→ ETKA (electronic parts catalogue)
t
The correct assembly device must be used for the corresponding sealing flange.
Sealing flange with assembly device -T10017-
1 - Pin
2 - Transport safety (only remove immediately before fitting)
Removing and installing
→ Chapter
Sealing flange with assembly device -T10134-
1 - Pin
2 - Transport safety (only remove immediately before fitting)
Removing and installing
→ Chapter
Power unit
4 Cylinder (1.4 l., 4 valve) injection engine
Enginecrankshaft group, pistons
Cylinder block, sealing flange and engine flywheel: removing and installing
Distinctive characteristics of the sealing flanges and the installation equipment T10017 y T10134
Crankshaft sealing flange, on the flywheel side: replacement (vehicles with manual gearbox) >
< Drive plate: Removing and installing