seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Exhaust gas recirculation system > < Stress-free alignment of exhaust system

Leon Mk1

Installation position and specified torque of clamp
Installation position and specified torque of clamp
  Note
Gradual insertion of the clamping sleeves with integrated connecting bracket.
   
Specified torque and mounting dimensions of clamping sleeve.
Clamping sleeve -A- with 2 separate connecting brackets.
   Tightening torque: 25 Nm
   Installation dimension -a-, 5 mm (only for the front clamping sleeve)
Clamp -B- with continuous clip.
   Tightening torque: 35 Nm
   Installation dimension -a-, 8.5 mm (only for the front clamping sleeve)
  N26-10627
Installation dimension -a- for vehicles with markings on the front exhaust pipe.
1 - Attachment bush
2 - Primary exhaust pipe
a - Installation dimension
A - Brand
  N26-10302
Installation position of front clamp
–  Install clamp so that end of bolt -arrow- does not extend beyond lower edge of clamp.
l  Threaded connection faces right.
  N26-0468
Installation position of rear clamp
–  Install clamp so that end of bolt -arrow- does not extend beyond lower edge of clamp.
l  Threaded connection faces to rear.
  N26-0468

Exhaust gas recirculation system > < Stress-free alignment of exhaust system