Leon Mk1
Charge air cooler: assembly overview |
1 - | Intake manifold |
q | removing and fitting → Chapter |
2 - | Seal |
q | replace |
3 - | Throttle valve control mechanism -J338- |
q | removing and fitting → Chapter |
4 - | Securing clip |
5 - | Bolt |
q | 7 Nm |
6 - | O ring |
q | replace |
7 - | Air pipe |
8 - | Retaining rod |
9 - | Bolt |
q | 7 Nm |
10 - | O ring |
q | replace |
11 - | Charge air pressure sender -G31- / intake air temperature sender 2 -G299- |
q | removing and fitting → Chapter |
12 - | Bolt |
q | 5 Nm |
13 - | Intake air temperature sender -G42- / intake manifold pressure sender -G71- |
14 - | Bolt |
q | 5 Nm |
15 - | O ring |
q | replace |
16 - | Seal |
q | replace |
17 - | Sealing lip |
18 - | Coolant return hose |
19 - | Coolant supply hose |
20 - | Bolt |
q | Tightening torque and sequence → Fig. |
21 - | Charge air cooler |
q | removing and fitting → Chapter |
|
stage: | Bolts | Specified torque . |
1. | -A … F- | Screw in by hand until it stops. |
2. | -A … F- | 7 Nm |