Leon Mk1
|
WARNING
| 1 - | Cylinder 1 injector -N30- up to cylinder 4 injector -N33- |
| q | Removing and installing → Chapter |
| 2 - | 5 Nm |
| 3 - | Fuel rail |
| q | Removing and installing → Chapter |
| 4 - | Speed nut |
| 5 - | Pressure limiting valve, 30 Nm |
| q | Removal and installation involves removing the intake manifold → Chapter |
| 6 - | Low-pressure line |
| q | Counterhold when removing the pressure relief valve. |
| q | Before installing, check the tightening torque of the pressure relief valve. |
| q | Do not fit under stress |
| q | Tighten coupling nut to 22 Nm |
| 7 - | Spring retainer |
| 8 - | Fuel line |
| q | Do not fit under stress |
| q | Tighten the coupling nut to fuel rail to 27 Nm |
| 9 - | Electrical connector |
| q | For injectors |
| 10 - | 5 Nm |
| 11 - | Fuel pressure sender -G247- |
| q | 22 Nm |
| q | Lubricate threads and taper seat with clean engine oil |
| q | Checking |
| q | Removing and installing → Chapter |
