Leon Mk1
Intake manifold - Assembly overview |
1 - | Intake manifold |
2 - | Oil seal |
q | Replace |
3 - | 7 Nm |
4 - | Throttle control unit -J338- |
q | Clean → Chapter |
q | When replacing, erase adaptive values and adapt the engine control unit to the throttle control unit → Vehicle diagnosis, testing and information system VAS 5051“Guided function” |
5 - | 20 Nm |
6 - | Flexible tube |
q | To brake servo |
7 - | O-ring |
q | Replace |
8 - | Coolant hose |
q | To preheat the crankshaft sump breather |
9 - | Spring-type hose clip |
q | Remove and fit with the hose clip pliers -VAS 6340- or the spring-type clip pliers -VAS 5024A- |
10 - | Crankshaft sump breather preheating device |
q | To remove and install, remove the intake manifold |
11 - | 3 Nm |
12 - | Flexible tube |
q | To crankshaft sump breather vacuum valve |
13 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
q | Locked in the intake manifold |