Leon Mk1
|
Functions selectable with the -V.A.G 1551/1552- fault reader or the -VAS 5051- unit |
The following table summarises the conditions in which the required functions can be selected: |
Function | Premise | |||
Functions of the -V.A.G 1551- fault reader, or the -V.A.G 1552- or -VAS 5051- | Engine turned off, ignition on | Engine idling | Vehicle Running | |
00 | Automatic checking cycle | no | yes | no |
01 | Consult the version of the control unit | yes | yes | yes |
02 | Consult Fault memory | yes → Note | yes | yes |
03 | Actuator diagnosis | yes | yes | no |
04 | Basic adjustment | no | yes | no |
05 | Erase fault memory | yes | yes | yes |
06 | End transmission | yes | yes | yes |
07 | Code control unit | yes | no | no |
08 | Read measurement value block | yes | yes | yes |
2) | Do this if the engine fails to start. The ignition must be on. |