seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Separating push-on couplings > < Removing and installing fuel delivery unit, fuel gauge sender

Leon Mk1

Removing and installing fuel gauge sender
Removing and installing fuel gauge sender
Carry out the following work:
Removal:
–  Observe safety precautions → Chapter.
–  Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
   
–  Pull fuel gauge sender -G- slightly to side and upwards at the same time.
  N20-10175
–  Push locking lugs -arrows- inwards to unlock.
–  Pull fuel gauge sender -G- upwards out of fuel delivery unit.
–  Note colour assignment of cables for re-installation.
  A20-10067
–  Release and pull off connectors -1- to -3-.
–  Bend back the locking hooks of the connectors.
  A20-10431
Installing:
–  Attach connectors -1- to -3-.
–  Note colour assignment.
–  Check connectors are secured properly by pulling.
–  Insert fuel gauge sender -G- into guide on fuel delivery unit and press down until it engages.
–  Install fuel delivery unit → Chapter.
  A20-10431

Separating push-on couplings > < Removing and installing fuel delivery unit, fuel gauge sender