seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Contact corrosion! > < Pin assignment of connections on dash panel insert, vehicles 11.03??

Leon Mk1

With the mileometer button
With the mileometer button
   
(pressing the mileometer button -1- on the instrument panel)
During
t  the Delivery Inspection,
t  each Oil change service,
t  each Inspection Service, the Service interval indicator must be reset to zero.
  Note!
Each service must be reset to zero separately. Only the mileometers and timers for the service type on the display at the moment are reset to zero.
To reset the display to zero:
–  Switch off the ignition
  E01-0123
–  Hold down the button -1- below the mileometer.
–  Switch on the ignition and hold down the button -1- (10 seconds minimum), until 3 bars appear on the display (- - -) or until one of the services it displayed. The service is now reset to zero.
–  Release the button -1-.
–  Switch off the ignition.
After resetting the service interval indicator to zero, the last trip mileage is displayed again.
  Note!
t  Bear in mind that only the service displayed at the moment can be reset to zero.
t  Follow the same procedure to reset the other service to zero.
  E01-0123

Contact corrosion! > < Pin assignment of connections on dash panel insert, vehicles 11.03??