seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Lights and controls in the centre console > < Lights and controls in front doors

Leon Mk1

Removing and installing driver side switch element
Removing and installing driver side switch element
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
Removing:
–  Switch off ignition and all electrical consumers, and remove ignition key.
–  Remove door panel trim on driver side → General body repairs, interior; Rep. gr.70.
  W00-0016
–  Release catches -arrows- of switch element on driver side -1- using the removing wedge -VAS 3409- or a suitable screwdriver.
–  Remove switch element on driver side -1- from the door trim, beginning at the front.
Installing:
Install in the same way but in reverse order of removal. When doing this, note the following:
  N96-11023
–  Insert switch element on driver side -1- into the door trim, beginning at the rear -2-, and then push it in so that it latches into place securely.
  N96-11024

Lights and controls in the centre console > < Lights and controls in front doors