seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Cigarette lighter, sockets > < Removing and installing switch elements in door trims

Leon Mk1

Removing and installing centre console switch module
Removing and installing centre console switch module
The centre console switch module -EX23- is located in the centre console in front of the gear selector knob and, depending on the equipment in the vehicle, contains the following components:
t  Tyre pressure monitor display button -E492-
t  Pushbutton for emergency braking function -E773-
t  Socket -U- or cigarette lighter -U1-
Removing:
–  Switch off ignition and all electrical consumers, and remove ignition key.
–  Remove cover of centre console → General body repairs, interior; Rep. gr.68.
   
–  Release the two catches -arrows- and pull the mounting frame -1- outwards out of centre console -2-.
  N96-11009
–  Release the catches -arrows- with a suitable screwdriver and push centre console switch module -EX23--1- out of mounting frame -2-.
Installing:
Install in the same way but in reverse order of removal. When doing this, note the following:
  N96-11010
–  First insert right side of mounting frame -1- into cover of centre console -2- and then push mounting frame in on left side to ensure it locks into place securely.
  N96-11011

Cigarette lighter, sockets > < Removing and installing switch elements in door trims