Vehicle electricsRadio preparation ? 04.96
| Radio preparation ► 04.96 |
| The radio preparation with 10 loudspeakers includes: |
| t
| Front bass loudspeakers in the right and left door trim |
| t
| Front treble loudspeakers in the dash panel on the left and right |
| t
| Rear bass loudspeakers in the right and left door trim |
| t
| Rear treble loudspeakers by the right and left door handles |
| t
| Wideband loudspeaker in the side trim of the right and left C-pillars |
Note! |
|
|
| When retrofitting an “alpha”, “beta” or “gamma” radio unit from SEAT, the earth cable must be removed from slot 2 of the black, 8-pin multi-pin connector -T8--, as otherwise the phone muting function would be permanently activated. |
| The 8-pin multi-pin connector -T8- is located on the upright pillar on the left inside the radio installation slot. |
|
|
Diagram not available
|
| –
| In order to connect the loudspeakers, the black, 14-pin multi-pin connector I must be detached at the amplifier and directly connected to the loudspeaker output of the radio with adapter line RP no. 7M0 051 443. The amplifier remains unused. |
| If necessary, use an adapter plug for the radio aerial connection. |
| If a radio unit from another manufacturer is to be retrofitted, please follow the installation and connection instructions issued by the manufacturer in question. |
|
|
Diagram not available
|
06 General
