Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk206 · Vehicle electrics
06 · General

Radio: Removing and installing

Make
SEAT
Model
Leon Mk2
Section
Infotainment › Radio Adagio › Radio: Removing and installing
Vehicle electricsRadio: Removing and installing
Radio: Removing and installing
Special tools and workshop equipment required
   
t  Radio release tool -T10057-
–  When renewing control unit, select „Replacement“ function for appropriate control unit in „Guided Fault Finding“.
To do so, use the vehicle diagnostic, testing and information system -VAS 505X- .
–  Switch off all electrical components.
–  Remove the ignition key.
Removing:
  Diagram not available
–  Insert two radio release tools -T10057- into slots on radio -R- until they engage. The handle ring tips point outwards.
–  Pull radio -R- out of dash panel.
–  Release and unplug connectors at radio -R-.
–  Press release tabs on radio -R- and remove radio release tool -T10057-.
Installing:
–  Plug in all connectors.
–  Slide radio -R- carefully into dash panel and engage it in mounting frame.
  Diagram not available

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.