seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Information for retrofitting the radioR > < Radio devices
General notes
General notes
The communications systems of the new Exeo und Exeo ST consists of the radio device or a radio / navigation system, the telephone installation, the aerial system, the loudspeakers, the USB connection, the iPod connection, the multimedia control unit, the connection for external audio sources, the CD changer and the sound system with amplifier.
Certain equipment options are only available as an option and are therefore not all of them are installed serially.
  Note
t  It is essential to be familiar with the operation and handling of the communication systems in event of customer complaints.
t  Additional information can be obtained in the → Operating manual
t  During repair work or troubleshooting, the → vehicle diagnosis, testing and information systemVAS 505X must be used in the function „Guided Fault Finding“ → Current flow diagrams, Electrical fault finding and Fitting locations.
When re-connecting a battery -A-, always adhere to correct sequence for connecting and disconnecting the battery -A- → Electrical System; Rep. gr.27.
Always use radio devices -R- and fitting components from the SEAT program so as to ensure trouble-free installation and optimum reception.
All radio systems -R- are encoded so they recognise the instrument cluster (anti-theft coding). When removing and installing the same radio -R- or instrument cluster and after disconnecting the power supply, it is not necessary to encode the system.
Fault finding is performed via the „Guided Fault Finding“ → Vehicle diagnostic tester.
Aerial wire repairs → Electrical system; Rep. gr.97.
CAN bus wire repairs → Electrical system; Rep. gr.97.
   

Information for retrofitting the radioR > < Radio devices