skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Removing and installing engine|Install

Fabia Mk1

Assembly bracket
Assembly bracket
Tightening torques
   
Engine mounting
1 - 20 Nm + torque a further 90° (1/4 turn) - replace
2 - 30 Nm + torque a further 90° (1/4 turn) - replace
  S10-0124
Gearbox mount
1 - 50 Nm + torque a further 90° (1/4 turn) - replace
2 - 40 Nm + torque a further 90° (1/4 turn) - replace
  S10-0125
Pendulum support
  Note
Tighten screws -1- in the elongated holes of the support in such a way that the maximum permissible distance is obtained between the gearbox and the assembly carrier.
1 - 30 Nm + torque a further 90° (1/4 turn) - replace
2 - 40 Nm + torque a further 90° (1/4 turn) - replace
  S10-0126

Enginecrankshaft group, pistons > < Removing and installing engine|Install