Fabia Mk1
Summary of components - Vehicles with air conditioning |
Note
t | Mark the rotation direction before removing the V-ribbed belt. Reversing the rotation direction of an already used belt may destroy it. |
t | Pay attention to the correct position of the V-ribbed belt in the belt pulley when installing it. |
1 - | 10 Nm + torque a further 90° (1/4 turn) |
2 - | V-ribbed belt pulley |
q | Assembly only possible in one position - holes offset |
3 - | 25 Nm |
4 - | AC generator |
q | to facilitate the positioning of the generator on the holder drive the threaded bushings of the retaining screws slightly backwards |
5 - | Tensioner for V-ribbed belt |
6 - | Support |
q | for injection pump, generator and AC compressor |
q | Fitting sleeve → Fig. |
7 - | 45 Nm |
8 - | AC compressor |
q | removing and installing → Heating, Air Conditioning; Rep. gr.87 |
9 - | Dowel sleeves for AC compressor |
q | must be located in the holder Pos. 6 |
10 - | V-ribbed belt |