Fabia Mk1
| Summary of components - Vehicles without air conditioning |
Note| t | Mark the rotation direction before removing the V-ribbed belt. Reversing the rotation direction of an already used belt may destroy it. |
| t | Pay attention to the correct position of the V-ribbed belt in the belt pulley when installing it. |
| 1 - | 10 Nm + torque a further 90° (1/4 turn) |
| 2 - | V-ribbed belt pulley |
| q | Assembly only possible in one position - holes offset |
| 3 - | 25 Nm |
| 4 - | Tensioner for V-ribbed belt |
| 5 - | Support |
| q | for injection pump and generator |
| q | Fitting sleeve → Fig. |
| 6 - | 45 Nm |
| 7 - | AC generator |
| q | to facilitate the positioning of the generator on the holder drive the threaded bushings of the retaining screws slightly backwards |
| 8 - | 25 Nm |
| 9 - | V-ribbed belt |
|
|
