Fabia Mk2
| Summary of components of door handle and door lock |
| 1 - | Door lock |
| q | Removing and installing → Chapter. |
| 2 - | Control cable |
| q | Serves to release the lock |
| 3 - | Clamp |
| q | Removing: |
| l | Door handle, lock cylinder housing and assembly carrier have been removed. |
| – | Remove screw (Pos. 4), push the clamp slightly back and remove from door. |
| q | Installation is carried out in the reverse order. |
| 4 - | 5 Nm |
| 5 - | Door handle with washer |
| q | Removing and installing → Chapter. |
| 6 - | Cap |
| 7 - | Lock cylinder housing |
| q | Removing and installing → Chapter. |
| 8 - | Pressure washer |
| 9 - | 2.8 Nm |
| q | Releasing this screw unlocks the catch of the lock cylinder housing (Pos. 7) and the lock cylinder housing can then be removed from the clamp (Pos. 3). |
| q | Do not tighten screw without the lock cylinder housing being in position. The catch could fall inside the door. |
| 10 - | 2.8 Nm |
| q | Releasing this screw unlocks the lock cylinder housing (Pos. 7) and the lock cylinder housing can then be removed from the clamp (Pos. 3). |