skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Vehicle electrics > < Removing

Fabia Mk2

Install
Install
–  Lightly oil new gasket ring at outer surface.
   
–  Fill half the space between the sealing lip and dust lip with sealing grease -G 052 128--arrow-.
  N32-10016
–  Drive the new seal ring in up to the stop, do not twist the seal ring.
–  Insert the flange shaft.
–  Tighten new conical screw to the recommended tightening torque → Anchor.
–  Fit the right drive shaft to the flange shaft → Chassis; Rep. gr.40.
–  Change gearbox oil → Chapter.
  Note
The gearbox oil must be changed, only in this way the correct gear oil level can be ensured.
–  Install the noise insulation → Body Work; Rep. gr.50.
  N39-10438
Tightening torque
ComponentNm
Flange shaft on gearbox (conical screw)1)30

1) Always replace conical screw → Electronic Catalogue of Original Parts.
   

Vehicle electrics > < Removing